Ozonizer Systems – A Better Alternative to Chlorine Treatment
Ozonator Systems are one of the most cost-effective and efficient ways to treat waste water. They are also a safer and greener alternative to chlorine treatment.
Ozone is an effective oxidant and disinfectant that destroys bacteria, viruses, and parasites. It also removes odors and tastes from water.
UV Ozonators
When it comes to keeping your hot tub or pool water sanitized, UV and ozone technology can do the trick. Both systems are safe, effective and reduce the amount of chlorine needed by up to 50%.
Ozone is an oxidizing agent that can kill a variety of germs and bacteria, including those common to swimming pools, such as Giardia, Pseudomonas and Cryptosporidium. Ozone also eliminates harsh, unwanted odors.
Ozonators create ozone in one of two ways: using intense ultraviolet (UV) light or by what’s known as a corona discharge (CD) unit. In either case, a UV lamp generates a wavelength of between 185 and 254 nanometers (nm) that hits an oxygen atom and creates ozone.
UV systems are typically powered by a fan that propels ambient air over a UV bulb. Compared to CD units, UV systems are more expensive and produce ozone more slowly. However, they’re much easier to clean and don’t suffer from high humidity, which can affect conductor ionization in CD units.
Another advantage of UV ozone systems is that they don’t require the use of a specialized Ozonizer Systems filter. They can be used in conjunction with a salt chlorinator, as well as with a chlorine generator, to maintain the proper chemistry of your pool.
The UV ozone technology in these systems also removes many of the byproducts of chlorine, such as phosphates and bromine. These byproducts can lead to skin irritation, so they’re best avoided when possible.
To use an ozone system with your spa, you’ll need to connect the ozonator to your spa via a nozzle or a jet near the bottom of your spa. The nozzle will usually have a water port and an air (ozone) port. The ozonator will need to be run on a regular basis to see maximum performance.
When you’re ready to use your new ozonator, attach the vinyl tubing supplied with the kit to the hot tub’s suction tubing. Make sure to cut the tubing at about six inches and install a check valve to prevent water backflow. After that, you’re all set!
CD Ozonators
A CD Ozonator is an ozone generator that uses corona discharge to generate ozone. It can handle a larger volume of water than UV models, has a longer functional life, and costs less to run.
A Corona Discharge ozonator works by using high voltage electrical discharges to create a ring of energy around the ozone bulb, causing oxygen molecules to split apart and reassemble into ozone. It can last up to a decade, but be sure to clean it regularly and run it during low ambient humidity for best performance.
The most common way to tell if you need to replace your ozonator is if the water quality has been getting worse lately. A lack of sparkle, cloudy water, algae or a rash may all be symptoms of a depleted ozone output. If this is the case, you should be able to find replacement bulbs or a new CD chip in most cases to make it easier to get back to crystal clear water.
Most ozonators use a small in-line check valve (popette) to regulate the air flow to the ozone jet. It is important that this check valve is replaced periodically to maintain proper ozone output and keep the ozone jet running efficiently.
Another common ozone indicator is a blue or red light on the ozonator. Usually this is the power-on light for a UV ozonator, and sometimes a Del spa ozonator will also have a light to indicate ozone production, but it can be hard to tell when the unit is not producing ozone.
Ozone is a very powerful oxidizer that can remove organic wastes and other contaminants in your water. This is the primary reason you should install an ozonator in your hot tub or spa.
Many people don’t realize that their ozonators can be depleted and will begin to fail without a proper replacement. This can lead to poor water chemistry and a need for more chemicals than necessary.
A CD ozonator is an ideal solution because it’s easy to install and will not require cartridges, chips or bulbs to replace like UV models do. It can be installed in most hot tubs with little to no difficulty and is the newest technology available for generating ozone. It’s also much less expensive to operate than a UV ozonator and can often be retrofitted to existing systems as well.
Maintenance
Ozone systems are a Ozonizer Systems great way to provide a natural, non-toxic sanitizer for your pool. But like any system, they require regular maintenance to keep them running efficiently and effectively.
Ozonators operate by using UV or corona discharge to split oxygen molecules into free atoms that then recombine with ambient oxygen to produce ozone. Both types of ozonators can last for years when properly maintained and operated, but each type has its own specific upkeep requirements.
A typical ozonator will need to be replaced every two to three years, depending on how much use it gets and how often it’s turned on and off. Fortunately, the replacement parts for these systems are relatively inexpensive and easy to locate.
Typically, these units come with replacement parts for the ozone tubing and check valve. In addition, the ozone chips and electrodes will need to be changed after a few years of usage.
Another important component of an ozonator is the ozone injector. If this part starts to leak or breaks down, the system can quickly become inoperable. To avoid this problem, make sure the injector is plugged in and the ozone hoses are installed correctly.
If you notice that your ozone output is significantly lower than what it should be, consider replacing the injector. This is a simple part to install and should only take a few minutes of your time.
Injection fittings also need to be replaced regularly. These are molded plastic parts that connect the ozone tubing to the ozone injection fitting. They can also get clogged with dirt and grime, so you’ll need to clean them frequently.
These components are generally easy to find, but they can be hard to get to if you’re unfamiliar with them. So it’s a good idea to have an experienced professional service them.
Ozonators also need to be checked periodically for signs of corrosion, such as rust or corrosion around the heating element. This corrosion can reduce the ozone output and increase energy costs.
Regardless of which ozonator you choose, it’s essential to follow the manufacturer’s guidelines for installation and maintenance. Failure to do so will result in unnecessary downtime and costly repairs.
Replacement Parts
Ozone has a long history in the hot tub community but it still takes a bit of finesse to get it up and running. A good quality ozone system will not only save you from the dreaded monthly shock treatment but also make your water sparkle. Ozonizer Systems has all the parts and pieces you need to keep your ozone machine in top shape. The company has a staff of professionals that can help you decide which one of their many models best suits your needs. They carry everything from pumps to filters, and all of the accessories in between. Their knowledgeable representatives are ready to answer any question you may have, big or small. So, the next time you’re in the market for a new ozone machine for your D1 spa, give them a call.
